N335DN

The airframe bearing tail number N335DN is an Airbus-built narrowbody delivered in 2018 with manufacturer serial number 8036. It is an Airbus A321-213(WL) built by Airbus SAS and is registered in the US. The airframe is owned by Delta Air Lines Inc (a corporation based in Atlanta, GA, US) and is operated from the carrier’s Atlanta base; notable registry actions and formal valuation/condition data are not published.

The cabin of this specific A321 is configured in a high-density two-class layout comprising approximately 20 premium seats, 29 Economy Comfort seats, and 142 Economy seats for a total of 191 seats. In service with Delta Air Lines Inc from its Atlanta base, the airframe’s range of 3,214 nm and cruise speed of 450 kts support medium- to long-range narrowbody missions typical of transcontinental and select thin transatlantic or extended domestic sectors. Avionics and line-fit equipment specifics are not published for this tail number; maintenance planning follows operator schedules for the A321 family and the CFM56-5B series engines used on this airframe.

As an Airbus A321-213(WL), serial 8036, this aircraft sits in the single-aisle, high-capacity segment intended to balance payload and range; its 39,000 ft ceiling and 3,214 nm range provide flexibility for extended narrowbody missions. The use of CFM56-5B3/P engines with 31,000 lbf thrust per engine positions the airframe for well-understood maintenance cycles and aftermarket support networks associated with that engine model. The installed high-density, two-class 191-seat layout affects both in-service unit revenue profile and resale/lease marketability, as prospective buyers evaluate interior reconfiguration costs against operational demand.